 Ford Transit Van Security
 Installation photographs from our full-colour instruction book are shown below. The kit also includes step-by-step instructions and a schematic wiring diagram.
For other support questions, please e-mail us.
(FWA 0070)
| Under the Bonnet | 1. The Bonnet Sensor | 2. Mounting the Siren |  |  | | |
Inside the Van | 3. Fix the template. | 4. LED fitted. |  |  | | | | The Rear Door Pin Switch 
5. Pin switch fitted. |
The Sliding Door | The Passenger Door Pin Switch | | 6. Location of Pin Switch for Side-Loading Door | 7. Pin Switch Fitted to be Operated by Passenger's Door. |  Contact Plate Pin Switch |  |
Main Electrical Connections | | | | | 8. Ford Connector unclipped from top of wheel arch. 
Pin Configuration 
| | 9. Bulkhead Behind the Glove Box. 
|
| 10. Harness Fitted | | 11. Connection to the Ford CDL Module |  | To Factory Harness | Remove Factory Harness and Plug in Green Connector from Wolf Harness 
|
|
12. Alarm Module Mounting | 13. Microphone Location |  | 
| | 14. Sensor Mounting 
|
The alarm is now ready for testing! | 
